50% OFF SITEWIDE · Orders before 4PM PST ship same day
50% OFF SITEWIDEOrders before 4PM PST ship same day
Quality

What a Certificate of Analysis (COA) Actually Tells You

Liquid chromatograph mass spectrometer (LC-qTOF) in an analytical chemistry laboratory
Image: Šárka Na kopci / Wikimedia Commons (CC BY-SA 4.0)

Every research peptide should arrive with a Certificate of Analysis, and most do. The harder question is what the document proves. A COA is a snapshot of specific tests on a specific lot, and it is only as informative as the tests that were run and the laboratory that ran them. This article explains what a COA can tell you, what it cannot, and how to spot one that says less than it appears to.

What a COA Is

A Certificate of Analysis is a report from an analytical laboratory stating the results of defined tests on a defined batch (lot) of material. For research peptides the core tests are identity (is this the molecule claimed?) and purity (how much of the material is that molecule?). A good COA ties those results to a lot number that also appears on the vial, so that any vial can be traced back to its analysis. For a field-by-field walkthrough of the document, see How to Read a COA; this article is about interpretation.

What a COA Can Tell You

Identity

Mass spectrometry measures the molecular mass of the material and compares it with the theoretical mass of the intended sequence. A match within a fraction of a Dalton is strong evidence the correct peptide is present. For a compound like TB-500, where the market name covers more than one molecule, this line is the one that tells you which form you have.

Purity

High-performance liquid chromatography (HPLC) separates the components of the material and reports what fraction of the total detected signal belongs to the main peak. A result of 99.2% means that 99.2% of the UV-absorbing material eluted as the target peptide. Our article What Does 99% Purity Actually Mean? covers the method; Understanding Peptide Purity covers why the remaining fraction matters.

Lot-specific confirmation

Because the COA is tied to a lot, it confirms that this batch was tested, not a representative batch from months ago. The test date tells you how recent the analysis is.

What a COA Cannot Tell You

Net peptide content. HPLC purity is a ratio among peptide species. It says nothing about how much of the powder’s mass is peptide versus counter-ions (acetate or trifluoroacetate from synthesis), bound water, and salts. A 99% pure peptide may be only 75–85% peptide by weight. If your work needs accurate molar concentrations, look for a separate net peptide content or amino acid analysis result, or account for the gap in your calculations (see Reconstitution Basics).

Impurities the method does not detect. HPLC with UV detection sees compounds that absorb at the chosen wavelength and elute within the run. Inorganic salts, residual solvents, and endotoxins are invisible to it. Separate tests exist for each; most research COAs do not include them, and that is normal, but it means “99% pure” is a statement about peptide-related impurities only.

Sterility. A COA for a lyophilized research peptide does not establish sterility unless a sterility test is explicitly listed.

Stability after shipping and storage. The COA describes the material on the test date. Degradation after that, from heat in transit or poor storage, is not captured. This is why handling matters as much as the certificate; see Storing Lyophilized Peptides.

Biological activity. Identity and purity establish that the right molecule is present and clean. They do not prove it folds correctly or behaves as expected in an assay. For most short linear peptides this is not an issue; for longer or disulfide-containing sequences, a functional assay is the only real confirmation.

Red Flags

How Pristine Aminos Handles COAs

Every lot we sell is analyzed by an independent laboratory for identity (mass spectrometry) and purity (HPLC), and the certificate for each product and lot is published on the product page and in our Testing section. The lot number on your vial matches the certificate you can download. If a document for your lot is missing or does not match, contact us before using the material.

Summary

A COA proves identity and peptide purity for a specific lot on a specific date. It does not prove net peptide content, sterility, freedom from non-peptide impurities, or stability after the test. Read it for what it establishes, use the chromatogram rather than the headline number, and treat anything without a matching lot number as decoration.

For laboratory and research use only. Not for human or veterinary use, consumption, or therapeutic application.

Research use only. The compounds discussed on this blog are intended for in-vitro laboratory research. Nothing here is medical advice, and none of these materials are for human or veterinary use.

Research Materials

Compounds referenced in this article, each lot third-party tested with a Certificate of Analysis.

TB-500 Tissue & Cell Migration Research TB-500 View product → BPC-157 Tissue & Cell Migration Research BPC-157 View product → GHK-Cu Cellular & Mitochondrial Research GHK-Cu View product → NAD+ Cellular & Mitochondrial Research NAD+ View product →

Compound data: TB-500 data sheet BPC-157 data sheet GHK-Cu data sheet NAD+ data sheet All data sheets →

Keep Reading

LAL and recombinant Factor C endotoxin assays in a peptide research lab.
November 13, 2026

Peptide Endotoxin Testing: Methods and Interpretation

Read →
Laboratory technician checking a genetic analyzer instrument
October 2, 2026

Inside Third-Party Peptide Testing: HPLC, Mass Spec, and Why Independence Matters

Read →
Analytical instruments and technicians in a modern quality-control laboratory
August 28, 2026

What Does 99% Purity Actually Mean? HPLC Testing Explained

Read →

← All Articles